Woodworking Buying Guides
Practical help from our Sainte-Sophie workshop for planning a solid-wood project. Start with a detailed checklist, or use the quick references below to compare measurements, wood and finish choices.
Plan your project
-
Compare eight woods for stair treads →
Compare colour and grain, then explore finishes and dimensions. -
Solid-wood stair treads: your quote checklist →
Count and measure your treads, identify visible surfaces and prepare useful photographs. -
How to measure for a pine sliding barn door →
Separate opening size, door coverage and usable wall travel before choosing a panel. -
Choosing a custom solid pine fireplace mantel →
Compare proportions and wood character, then confirm mounting and fireplace requirements.
Sliding doors: the quick reference
Measure the finished opening in several places and record width and height. Product dimensions describe the overall door leaf, not the opening.
Note whether you need one door or a pair, the opening direction, clear wall space beside the opening and space above it. Photograph trim, switches, outlets and other obstacles. Confirm overlap, floor clearance, rail length and mounting support with the selected hardware before finalizing dimensions.
Our pine door range offers widths of 24, 28, 30, 32, 34 or 36 inches; heights of 78, 80, 82, 84 or 88 inches; and thicknesses of 1-3/8, 1-1/2 or 1-3/4 inches. Rail, rollers, handles and installation are quoted separately.
Choosing your stair treads
Start with the wood character you prefer: pronounced grain in red oak or ash, lighter tones in birch or sugar maple, distinctive streaks in ambrosia maple, warm cherry, neutral white oak or rich black walnut. Natural colour and grain vary from board to board.
Choose a length of 36, 40, 42, 46, 48 or 54 inches. Standard depth is 11 inches, with thickness choices from 1-1/2 to 3 inches. Confirm finished measurements and thickness with your installer before ordering.
- Raw: glued and planed, for your own preparation.
- Sanded: sanded to 120 grit, ready for your finish.
- Matte oil: sanded and oiled.
- Colour match and varnish: custom matching with water-based acrylic varnish.
Select the correct staircase type: open central stringer, open side stringers, or closed with risers. Identify visible faces. Prices are per tread; stringers, risers and installation are excluded.
Choosing a stain on pine
The barn doors and Dream Beam bed offer 35 Minwax Wood Finish oil-based stain colours in their palettes. Change the model or camera view and select a stain to explore the look.
A digital preview is an illustration. Pine grain, knots, preparation and room lighting affect the finished colour. For a close match to existing flooring or furniture, send a clear photograph in natural light and discuss a physical sample before production.
- Doors: staining adds 30% to the selected sanded door price.
- Dream Beam: the selected frame stain and two coats of water-based varnish are included.
- Mattress-support planks: left natural and unstained; the preview applies to the frame and headboard.
For other products, use the finish choices on that product’s page. The door palette does not automatically apply to every collection.
Will a Serenity bench fit my entryway?
Serenity’s standard height is 18 inches (45.7 cm) and depth is 12 inches (30.5 cm). Mark your chosen length × 12-inch depth on the floor, then check the door swing and walking route. For custom dimensions, contact the workshop before ordering.
Ready to discuss your project? Send measurements with units, photographs, your wood and finish preferences, city and preferred timing.
Explore our custom stair treads, mantels and barn doors in Sainte-Sophie →
Save a checklist to Pinterest
Keep our planning checklists on your project board for later.